Last updated: November 2026 | Reviewed by Ira Lacroix, Director of Operations, Tracx
USPS highway contract routes (HCRs) up for bid are posted as solicitations. USPS says postal opportunities can be found on SAM.gov, and it asks surface transportation suppliers to register in the USPS Logistics Gateway. To bid, register, read the whole solicitation, cost the route from real miles and hours, and submit your offer exactly as the solicitation asks.
Private trucking companies run HCRs under contract to move mail between plants, post offices and delivery points. When a contract ends, a new route is needed or a supplier leaves, the route goes out for bid.
New to HCR work? Start with our guide to what a highway contract route is. This one covers how to find, price and run the routes.
Quick answer
- Where to look: USPS says postal opportunities can be found on SAM.gov. Search Contract Opportunities for the Postal Service and "HCR".
- Register first: USPS asks surface transportation suppliers to register in the USPS Logistics Gateway.
- Read the whole solicitation: the schedule, trips per year, vehicle rules, wage rules and the submission instructions are all in it. Each solicitation says how and where to send your offer.
- Cost the route before you price it: drive or map the real miles, and build in wages, fuel, equipment, insurance and overhead.
- Plan the first 30 days: drivers, substitutes, HCR Mobile accounts and your TMS setup should be ready before the start date.
We built this guide from USPS and OIG documents, linked throughout. It isn't legal or wage advice. The solicitation and your contracting officer have the final word on every bid.
What "routes up for bid" means
A highway contract route is a USPS mail route run by a private supplier instead of USPS employees. Each route has a number (for example, HCR 970B5) and a schedule of trips.
USPS's purchasing manual sets the rules for these contracts. Under the Supplying Principles and Practices, section 8-2.3, regular surface contracts run for periods of up to 4 years, unless USPS decides a longer period is better. Temporary contracts may not run more than 2 years.
A route usually comes up for bid in one of these cases:
- The contract term ends and USPS doesn't renew it. Renewal is by mutual agreement. USPS has to decide renewal is the best value, and it can weigh continuity of service against the cost of re-soliciting (SP&P 8-2.3.6).
- USPS needs a new route or changes an existing one.
- A contract ends early, for example when a supplier is terminated or walks away.
- USPS needs short-term cover. These show up as temporary or emergency service solicitations.
Types of HCR work you'll see
Solicitation titles tell you the kind of work. Two you'll see often:
- Contract Delivery Service (CDS): box and delivery routes, often rural. A recent example on SAM.gov was solicitation 810-98-27 for CDS HCR 99579 in Chugiak, Alaska: about 303 trips a year, service from December 2026 to September 2030, offers due 9 November 2026.
- Transportation routes: trips that move mail between plants, hubs and post offices on a fixed schedule. The USPS Office of Inspector General splits them into Local Distribution Transportation (LDT), local routes generally under 300 miles, and Processing Network Transportation (PNT), longer hauls between processing facilities (OIG white paper RISC-WP-22-002).
USPS also buys extra capacity through Freight Auction, an as-needed spot market for overflow, peak volume and trips regular HCR contractors can't cover (OIG report 23-088-R24). Loads are bought trip by trip, not under a multi-year contract, which makes it an easier way for a new supplier to start hauling for USPS. Access and wage rules are different from a regular HCR contract, so read the terms of each load. USPS spent about $918 million on as-needed transportation from April 2022 through March 2024 (OIG report 24-121-R25).
Step 1: Get registered before you need to bid
Solicitations often have short response windows. Get your registrations done first.
- USPS Logistics Gateway. USPS's supplier registration page says surface transportation suppliers should register in the Logistics Gateway. You'll also need a Gateway account for the USPS HCR Mobile app later.
- SAM.gov. USPS says postal opportunities "can be found in SAM.gov". Create a free account so you can save searches and get email alerts. Before awarding a contract, the contracting officer checks the chosen supplier's "eligibility for award on SAM.gov" (SP&P 2-43.7), so read each solicitation for its registration requirements and complete them early.
- Business basics. Have your insurance, DOT/MC details, equipment list and driver roster ready. The exact requirements are in each solicitation.
Step 2: Find HCR routes up for bid
On SAM.gov:
- Search Contract Opportunities for "HCR" or "highway contract route", and filter the agency to the Postal Service.
- Add the states or postal areas you can cover.
- Save the search and turn on email alerts, so new notices come to you.
- Don't rely on a NAICS filter alone. Recent CDS box route notices use NAICS 491110, but other transportation routes may use different codes.
How offers are submitted varies from one solicitation to the next. Follow the submission instructions in each one.
Other ways to hear about routes:
- NSRMCA. The National Star Route Mail Contractors Association is the trade group for HCR contractors. Its events and member resources are a good way to learn about the process and hear about changes.
- Your local contracting office. If you hear about an upcoming route, ask the contracting officer named on past notices for that area. USPS's registration page also says to contact the eSourcing Helpdesk with the event name or solicitation number if you hear of an opportunity that isn't posted.
Step 3: Read the solicitation line by line
Every solicitation is different. Don't rely on what the last one said. Look for these items:
| What to find | Why it matters |
|---|
| Route number, origin and destination | Tells you where your trucks start, stop and park |
|---|
| Schedule and trips per year | Drives your labor, fuel and equipment cost |
|---|
| Estimated miles and hours | A starting point only. Check them yourself (see Step 4) |
|---|
| Contract term and start date | Sets how long you have to recover equipment and hiring costs |
|---|
| Vehicle requirements | Size, type, age, markings and safety lights |
|---|
| Scanning and tracking requirements | Tells you what equipment and apps your drivers need on day one |
|---|
| Wage requirements | HCR contracts are covered by the Service Contract Act, so suppliers must pay drivers at least the wage and fringe rates in the Department of Labor wage determination for the area (OIG white paper) |
|---|
| Extra trip pay | Check the extra-trip rate on your route |
|---|
| Submission method and deadline | Each solicitation sets the method (email, fax or portal). Note the time zone of the deadline |
|---|
| Questions deadline | Send questions in writing before this date |
|---|
If something in the solicitation doesn't match what you see on the ground, ask the contracting officer in writing before you bid.
Step 4: Cost the route before you price it
The price you offer has to cover the full cost of the route for the whole term. A route priced too low loses money on every trip, for years.
Check the real miles and hours
USPS solicitations can include estimated miles and hours. Treat them as estimates. In one published contract dispute, the solicitation advised suppliers to determine the actual miles before submitting a proposal (PSBCA Nos. 6784 and 6813): "Prior to submitting a proposal, the supplier should determine the actual miles." Drive the route or map it from your yard. Include:
- Deadhead from your yard to the first stop and back
- Wait time at plants and post offices
- Seasonal traffic and weather
Build the cost per trip
Work out a cost for one trip, then multiply by trips per year and years in the term.
- Driver wages and fringe, at no less than the rates the solicitation requires
- Substitute drivers for days off, sick days and turnover
- Fuel, at a realistic price per gallon and your truck's actual miles per gallon
- Equipment, whether you buy, lease or move a truck from another route
- Maintenance and tires, based on the miles you just checked
- Insurance
- Overhead, including dispatch, payroll, compliance and admin time
- Margin, so the route still pays if costs rise during the term
Where bids usually go wrong
- Deadhead. The route miles in a solicitation usually don't include the trip from your yard to the first stop and back. Fuel, wear and driver pay for those miles have to be in your price.
- Fringe on paid hours. Fringe benefits are owed on paid hours, not only driving hours, so pre-trip inspections and dock waits count. The wage determination in your solicitation sets the rates and the limits. Check how your contract handles wage determination updates during the term.
- Substitutes. Relief drivers need the same USPS clearance as your regular drivers, and covering callouts often means standby pay or overtime.
- Waiting at the dock. USPS has paid for some delays it causes when the driver gets a late slip (PS Form 5466) and the supplier files a claim (OIG report 22-202-R23). Short, routine waits usually go unclaimed and unpaid, and your drivers are on the clock either way.
- Backup equipment and scanning. Renting a compliant truck when yours breaks down, plus phones and data plans for USPS scanning, belong in overhead.
Plan for the trips that don't go to plan
Under USPS's Integrated Logistics Ecosystem (ILE), HCR suppliers are paid per trip. ILE runs on three USPS systems: CLEAR for contracts, USPS's Transportation Management System for schedules and payments, and the Logistics Gateway for suppliers. Dedicated contracts have a fixed rate per trip (OIG report 24-121-R25). Canceled, omitted, extra and late trips all change what you're paid, so build a buffer for them.
A 2025 review by the USPS Office of Inspector General (OIG) of HCR payments in CLEAR (USPS's Contract Logistics Enterprise Acquisition Resource system) found trips paid in full after USPS canceled them, and trips paid without reliable proof of delivery. The OIG recommended changing the HCR statement of work so trips canceled with at least four hours' notice get partial pay. USPS disagreed with partial pay, and later agreed to review canceled trips and take trips it no longer needs out of contracts (OIG audit resolution). When you price a bid, plan for the chance that trips come off the schedule during the term, and check your current statement of work for how canceled trips are paid.
Use your own data, not guesses
If you already run HCR routes, your best costing data is your own trip history. Actual miles, fuel, driver hours and substitutions on a similar route are more reliable than any rule of thumb.
Pull the real costs for the routes you run that look most like the one up for bid: driver pay per trip, fuel, maintenance, insurance and vehicle payments. If you run on Tracx, your trip records, driver pay and fuel data are already in one place and can be exported to a spreadsheet to build your estimate.
Step 5: Submit a clean offer
- Use the solicitation's own forms. Fill in every field.
- Follow the submission method exactly (email, fax or portal) and keep proof you sent it.
- Submit early. Don't count on the deadline hour, and check the time zone.
- Keep a copy of your costing worksheet with the offer. You'll want it at renewal time.
Step 6: Run the new route from day one
The first weeks set your on-time record, and USPS pays per trip from the first one.
Before the start date
- Hire and train drivers, plus at least one substitute.
- Get drivers cleared. Each driver needs USPS screening and clearance before they can enter postal facilities or handle mail (OIG white paper). Allow at least a month, and often two. USPS can grant temporary access to a driver who isn't cleared yet, using PS Form 2081, but it needs approval each time and is valid for 60 days (USPS Federal Register notice, March 2026). Don't plan your start date around it.
- Set up HCR Mobile. USPS's HCR scanning app is the official record of arrivals, departures and scans. It's for cleared HCR and subcontract drivers, and drivers given temporary access. Each driver needs to register (HCR Mobile terms).
- Check your equipment against the vehicle rules in the contract.
- Load the route into your TMS: the contract, route number, trip schedule and driver assignments.
How a TMS helps on a new route
A TMS doesn't replace HCR Mobile. It runs your business around it: contracts, dispatch, substitutions, pay and invoicing. On a new route, Tracx USPS HCR software covers:
- Contracts and schedules in one place. The contract, route number and trip schedule sit in the same dispatch board as the rest of your routes.
- Recurring trips dispatch automatically. Set the schedule once and Tracx dispatches the recurring trips unless something changes.
- Substitutions. When a driver calls out, Tracx shows who's off, who's free and who's on standby, so you can assign a substitute quickly.
- On-time monitoring. Tracx tracks departure and arrival times against your USPS schedule, so you can act before a late trip becomes a pattern.
- USPS connections. Tracx integrates directly with CLEAR, FourKites and Blue Yonder. It connects to 30 ELDs natively and to 290+ ELD and GPS platforms in total through the Terminal integration.
- Pay and invoices from trip records. Driver pay and invoices are built from completed trip records, including substitutions and extra trips, which makes it easier to match trips run to trips paid.
Most carriers go live on Tracx in about 30 days. If your new route starts sooner than that, talk to us early.
Proof from an HCR fleet
10,000 USPS trips a month, nearly 93% on time.
VP of Operations, Area Storage
Read the Area Storage case study
More USPS HCR carriers and more NSRMCA members run on Tracx than on any other TMS.
Step 7: Protect the route at renewal
Renewal is by mutual agreement, and USPS has to find that renewing is the best value (SP&P 8-2.3.6). In our experience, a clean on-time record matters most at renewal, with documented exceptions a close second.
- Keep clean trip records for the whole term: on-time results, substitutions, exceptions and the reasons for them. When USPS causes a delay, file the paperwork at the time. Without it, a late arrival looks like your failure in the renewal file.
- Keep your cost history, so you know whether the renewal rate still works and can back up a rate increase. USPS will still compare your rate with the market.
- Stay in regular contact with your contracting officer and administrative official. It keeps day-to-day issues from becoming problems, but it won't save a route with weak performance or an uncompetitive rate.
- Track scheduled trips against what you bid. USPS has agreed to review canceled trips and take trips it no longer needs out of contracts (OIG audit resolution), so the route you renew may be smaller than the one you won.
- Start preparing well before the contract ends, and check your contract for its renewal terms.
For a deeper look at ILE, HCR Mobile and the records USPS uses, read our guide to USPS ILE, HCR Mobile and your TMS.
FAQ
Where are USPS highway contract routes posted for bid?
USPS says postal opportunities can be found on SAM.gov. Search Contract Opportunities for "HCR" with the Postal Service as the agency, and set up email alerts. USPS also asks surface transportation suppliers to register in the USPS Logistics Gateway. Follow each solicitation's instructions for how to submit your offer.
How long is a USPS HCR contract?
Under USPS's Supplying Principles and Practices, regular surface contracts run for up to 4 years, unless USPS decides a longer term is better. Temporary contracts can't run more than 2 years. Check the term in each solicitation.
Can an HCR contract be renewed?
Yes. Competitively awarded surface transportation contracts can be renewed by mutual agreement between USPS and the supplier. USPS must decide that renewal is the best value, and it can consider continuity of service.
How are HCR suppliers paid?
Under USPS's Integrated Logistics Ecosystem (ILE), suppliers are paid per trip. Canceled, omitted, extra and late trips all affect what you're paid, so trip records matter.
Do I need a TMS to bid on HCR routes?
You don't need one to submit a bid. A TMS helps you cost routes from your own data and run them once you win.
Does a TMS replace the USPS HCR Mobile app?
No. HCR Mobile stays the official USPS record of arrivals, departures and scans. A TMS like Tracx handles contracts, dispatch, substitutions, driver pay and invoicing around it.
How much does Tracx cost for an HCR fleet?
Tracx is priced per asset, with annual plans from $22 per asset per month and unlimited users. See pricing for details.
Running HCR routes, or bidding on more?
See how Tracx handles contracts, recurring trips, substitutions and trip-based pay for USPS HCR contractors. Talk to a team that picks up the phone.
See Tracx for USPS HCR contractors · Book a demo